GNU bug report logs - #27064
after GuixSD installation

Previous Next

Package: guix;

Reported by: Quiliro <quiliro <at> riseup.net>

Date: Thu, 25 May 2017 05:29:02 UTC

Severity: normal

Done: Ricardo Wurmus <rekado <at> elephly.net>

Bug is archived. No further changes may be made.

To add a comment to this bug, you must first unarchive it, by sending
a message to control AT debbugs.gnu.org, with unarchive 27064 in the body.
You can then email your comments to 27064 AT debbugs.gnu.org in the normal way.

Toggle the display of automated, internal messages from the tracker.

View this report as an mbox folder, status mbox, maintainer mbox


Report forwarded to bug-guix <at> gnu.org:
bug#27064; Package guix. (Thu, 25 May 2017 05:29:02 GMT) Full text and rfc822 format available.

Acknowledgement sent to Quiliro <quiliro <at> riseup.net>:
New bug report received and forwarded. Copy sent to bug-guix <at> gnu.org. (Thu, 25 May 2017 05:29:02 GMT) Full text and rfc822 format available.

Message #5 received at submit <at> debbugs.gnu.org (full text, mbox):

From: Quiliro <quiliro <at> riseup.net>
To: bug-guix <at> gnu.org
Subject: after GuixSD installation
Date: Thu, 25 May 2017 00:29:10 -0500
After installation (with no error mesage), I reboot. These is the output of:
guix system init /mnt/etc/bare-bone.scm /mnt --fallback
http://sprunge.us/SXgC
GrUB starts to boot the system. Then the message
waiting for "my-root" partition
appears. Finally a Guile prompt appears after the following messages:
Error: in proceedure scm-error
failed to resolve partition "my-root"
I have tryed this 8 times changing different things such as label for uefi in bare-bones.scm:
http://sprunge.us/AhcN
http://sprunge.us/ZFAG




Information forwarded to bug-guix <at> gnu.org:
bug#27064; Package guix. (Thu, 25 May 2017 15:18:01 GMT) Full text and rfc822 format available.

Message #8 received at 27064 <at> debbugs.gnu.org (full text, mbox):

From: Quiliro <quiliro <at> riseup.net>
To: 27064 <at> debbugs.gnu.org
Subject: Re: bug#27064: after GuixSD installation
Date: Thu, 25 May 2017 10:18:58 -0500
El Thu, 25 May 2017 00:29:10 -0500
Quiliro <quiliro <at> riseup.net> escribió:

> After installation (with no error mesage), I reboot. These is the output of:
> guix system init /mnt/etc/bare-bone.scm /mnt --fallback
> http://sprunge.us/SXgC
> GrUB starts to boot the system. Then the message
> waiting for "my-root" partition
> appears. Finally a Guile prompt appears after the following messages:
> Error: in proceedure scm-error
> failed to resolve partition "my-root"
> I have tryed this 8 times changing different things such as label for uefi in bare-bones.scm:

Sorry. It is not UEFI. It is:
(title 'uuid)
for:
(title 'label)

> http://sprunge.us/AhcN
> http://sprunge.us/ZFAG
> 
> 
> 



-- 
Example of the problems in top posting:

A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing in e-mail?

A: No.
Q: Should I leave quotations after my reply?

Saluton,
Quiliro
0987631031




Information forwarded to bug-guix <at> gnu.org:
bug#27064; Package guix. (Thu, 25 May 2017 22:57:02 GMT) Full text and rfc822 format available.

Message #11 received at 27064 <at> debbugs.gnu.org (full text, mbox):

From: Quiliro <quiliro <at> riseup.net>
To: 27064 <at> debbugs.gnu.org
Subject: Re: bug#27064: SOLVED
Date: Thu, 25 May 2017 17:57:39 -0500
The case is solved. The problem was a bad USB installer. It took 20 minutes to install in a Celeron D with bare-bones.scm Thank all of you that were persistent enough to sugest hundreds of ideas in about 20 installations (some took several hours) and about 13 reboots.




Reply sent to Ricardo Wurmus <rekado <at> elephly.net>:
You have taken responsibility. (Fri, 26 May 2017 08:06:02 GMT) Full text and rfc822 format available.

Notification sent to Quiliro <quiliro <at> riseup.net>:
bug acknowledged by developer. (Fri, 26 May 2017 08:06:02 GMT) Full text and rfc822 format available.

Message #16 received at 27064-done <at> debbugs.gnu.org (full text, mbox):

From: Ricardo Wurmus <rekado <at> elephly.net>
To: Quiliro <quiliro <at> riseup.net>
Cc: 27064-done <at> debbugs.gnu.org
Subject: Re: bug#27064: SOLVED
Date: Fri, 26 May 2017 10:05:03 +0200
Quiliro <quiliro <at> riseup.net> writes:

> The case is solved. The problem was a bad USB installer. It took 20 minutes to install in a Celeron D with bare-bones.scm Thank all of you that were persistent enough to sugest hundreds of ideas in about 20 installations (some took several hours) and about 13 reboots.

Phew!  Thank you for persisting!

-- 
Ricardo

GPG: BCA6 89B6 3655 3801 C3C6  2150 197A 5888 235F ACAC
https://elephly.net





bug archived. Request was from Debbugs Internal Request <help-debbugs <at> gnu.org> to internal_control <at> debbugs.gnu.org. (Fri, 23 Jun 2017 11:24:04 GMT) Full text and rfc822 format available.

This bug report was last modified 6 years and 281 days ago.

Previous Next


GNU bug tracking system
Copyright (C) 1999 Darren O. Benham, 1997,2003 nCipher Corporation Ltd, 1994-97 Ian Jackson.