GNU bug report logs - #34111
[PATCH] gnu: u-boot: Update to 2019.01.

Previous Next

To add a comment to this bug, you must first unarchive it, by sending
a message to control AT debbugs.gnu.org, with unarchive 34111 in the body.
You can then email your comments to 34111 AT debbugs.gnu.org in the normal way.

Toggle the display of automated, internal messages from the tracker.

Message #5 received at submit <at> debbugs.gnu.org (full text, mbox):

From: Vagrant Cascadian <vagrant <at> debian.org>
To: guix-patches <at> gnu.org
Subject: [PATCH] gnu: u-boot: Update to 2019.01.
Date: Wed, 16 Jan 2019 15:21:52 -0800

[Message part 1 (text/plain, inline)]

* gnu/packages/bootloaders.scm (u-boot): Update to 2019.01.
  (u-boot-tools): Disable CONFIG_SOUND in sandbox configs.
  (u-boot-pinebook): Drop patches applied upstream.
* gnu/packages/patches/u-boot-pinebook-*: Drop obsolete patches.
* gnu/local.mk: Drop u-boot-pinebook patches.
---
 gnu/local.mk                                  |    6 -
 gnu/packages/bootloaders.scm                  |   24 +-
 .../u-boot-pinebook-a64-update-dts.patch      | 1485 -----------------
 .../patches/u-boot-pinebook-dts.patch         |  388 -----
 .../u-boot-pinebook-mmc-calibration.patch     |   98 --
 .../u-boot-pinebook-r_i2c-controller.patch    |   70 -
 .../patches/u-boot-pinebook-syscon-node.patch |   38 -
 .../u-boot-pinebook-video-bridge.patch        |   50 -
 8 files changed, 8 insertions(+), 2151 deletions(-)
 delete mode 100644 gnu/packages/patches/u-boot-pinebook-a64-update-dts.patch
 delete mode 100644 gnu/packages/patches/u-boot-pinebook-dts.patch
 delete mode 100644 gnu/packages/patches/u-boot-pinebook-mmc-calibration.patch
 delete mode 100644 gnu/packages/patches/u-boot-pinebook-r_i2c-controller.patch
 delete mode 100644 gnu/packages/patches/u-boot-pinebook-syscon-node.patch
 delete mode 100644 gnu/packages/patches/u-boot-pinebook-video-bridge.patch

diff --git a/gnu/local.mk b/gnu/local.mk
index 4fed45174..9f6df0d7e 100644
--- a/gnu/local.mk
+++ b/gnu/local.mk
@@ -1230,12 +1230,6 @@ dist_patch_DATA =						\
   %D%/packages/patches/totem-meson-easy-codec.patch		\
   %D%/packages/patches/tuxpaint-stamps-path.patch		\
   %D%/packages/patches/twinkle-include-qregexpvalidator.patch	\
-  %D%/packages/patches/u-boot-pinebook-a64-update-dts.patch	\
-  %D%/packages/patches/u-boot-pinebook-mmc-calibration.patch	\
-  %D%/packages/patches/u-boot-pinebook-r_i2c-controller.patch	\
-  %D%/packages/patches/u-boot-pinebook-dts.patch		\
-  %D%/packages/patches/u-boot-pinebook-syscon-node.patch	\
-  %D%/packages/patches/u-boot-pinebook-video-bridge.patch	\
   %D%/packages/patches/unzip-CVE-2014-8139.patch		\
   %D%/packages/patches/unzip-CVE-2014-8140.patch		\
   %D%/packages/patches/unzip-CVE-2014-8141.patch		\
diff --git a/gnu/packages/bootloaders.scm b/gnu/packages/bootloaders.scm
index 1cf7720a7..2a4f43f87 100644
--- a/gnu/packages/bootloaders.scm
+++ b/gnu/packages/bootloaders.scm
@@ -376,7 +376,7 @@ tree binary files.  These are board description files used by Linux and BSD.")
 (define u-boot
   (package
     (name "u-boot")
-    (version "2018.11")
+    (version "2019.01")
     (source (origin
               (method url-fetch)
               (uri (string-append
@@ -384,7 +384,7 @@ tree binary files.  These are board description files used by Linux and BSD.")
                     "u-boot-" version ".tar.bz2"))
               (sha256
                (base32
-                "0znkwljfwwn4y7j20pzz4ilqw8znphrfxns0x1lwdzh3xbr96z3k"))))
+                "08hwsmh5xsb1gcxsv8gvx00bai938dm5y3889n8jif3a8rd7xgah"))))
     (native-inputs
      `(("bc" ,bc)
        ("bison" ,bison)
@@ -440,6 +440,11 @@ also initializes the boards (RAM etc).")
               (("def test_ctrl_c")
                "@pytest.mark.skip(reason='Guix has problems with SIGINT')
 def test_ctrl_c"))
+             ;; This test requires a sound system, which is un-used in u-boot-tools.
+             (for-each (lambda (file)
+                              (substitute* file
+                                  (("CONFIG_SOUND=y") "CONFIG_SOUND=n")))
+                              (find-files "configs" "sandbox_.*defconfig$"))
              #t))
          (replace 'configure
            (lambda* (#:key make-flags #:allow-other-keys)
@@ -595,20 +600,7 @@ board-independent tools.")))
   (make-u-boot-sunxi64-package "pine64_plus" "aarch64-linux-gnu"))
 
 (define-public u-boot-pinebook
-  (let ((base (make-u-boot-sunxi64-package "pinebook" "aarch64-linux-gnu")))
-    (package
-      (inherit base)
-      (source (origin
-              (inherit (package-source u-boot))
-              (patches (search-patches
-                        ;; Add patches to enable Pinebook support from sunxi
-                        ;; maintainer tree: git://git.denx.de/u-boot-sunxi.git
-                        "u-boot-pinebook-a64-update-dts.patch"
-                        "u-boot-pinebook-syscon-node.patch"
-                        "u-boot-pinebook-mmc-calibration.patch"
-                        "u-boot-pinebook-video-bridge.patch"
-                        "u-boot-pinebook-r_i2c-controller.patch"
-                        "u-boot-pinebook-dts.patch")))))))
+  (make-u-boot-sunxi64-package "pinebook" "aarch64-linux-gnu"))
 
 (define-public u-boot-bananapi-m2-ultra
   (make-u-boot-package "Bananapi_M2_Ultra" "arm-linux-gnueabihf"))
diff --git a/gnu/packages/patches/u-boot-pinebook-a64-update-dts.patch b/gnu/packages/patches/u-boot-pinebook-a64-update-dts.patch
deleted file mode 100644
index 9d0a08c8b..000000000
--- a/gnu/packages/patches/u-boot-pinebook-a64-update-dts.patch
+++ /dev/null
@@ -1,1485 +0,0 @@
-From 1b39a1834ed182bbd8036a5cd74a9ea111fa4691 Mon Sep 17 00:00:00 2001
-From: Andre Przywara <andre.przywara <at> arm.com>
-Date: Mon, 29 Oct 2018 00:56:47 +0000
-Subject: [PATCH 03/13] sunxi: A64: Update .dts/.dtsi files
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Update the .dts/.dtsi file from the Linux sunxi/dt64-for-4.20 tree:
-commit 679294497be31596e1c9c61507746d72b6b05f26
-Author: Rodrigo Exterckötter Tjäder <rodrigo <at> tjader.xyz>
-Date:   Wed Sep 26 19:48:24 2018 +0000
-    arm64: dts: allwinner: a64: a64-olinuxino: set the PHY TX delay
-
-Signed-off-by: Andre Przywara <andre.przywara <at> arm.com>
-Acked-by: Maxime Ripard <maxime.ripard <at> bootlin.com>
-Reviewed-by: Jagan Teki <jagan <at> openedev.com>
----
- arch/arm/dts/sun50i-a64-amarula-relic.dts    | 168 +++++++++++++-
- arch/arm/dts/sun50i-a64-bananapi-m64.dts     |  34 ++-
- arch/arm/dts/sun50i-a64-nanopi-a64.dts       |  89 +++++++-
- arch/arm/dts/sun50i-a64-olinuxino.dts        | 103 ++++++++-
- arch/arm/dts/sun50i-a64-orangepi-win.dts     | 179 ++++++++++++++-
- arch/arm/dts/sun50i-a64-pine64.dts           |  32 ++-
- arch/arm/dts/sun50i-a64-sopine-baseboard.dts |  32 ++-
- arch/arm/dts/sun50i-a64-sopine.dtsi          |  15 ++
- arch/arm/dts/sun50i-a64.dtsi                 | 313 +++++++++++++++++++++++++--
- 9 files changed, 920 insertions(+), 45 deletions(-)
-
-diff --git a/arch/arm/dts/sun50i-a64-amarula-relic.dts b/arch/arm/dts/sun50i-a64-amarula-relic.dts
-index f3b4e93ece..6cb2b7f0c8 100644
---- a/arch/arm/dts/sun50i-a64-amarula-relic.dts
-+++ b/arch/arm/dts/sun50i-a64-amarula-relic.dts
-@@ -22,11 +22,11 @@
- 		stdout-path = "serial0:115200n8";
- 	};
- 
--	reg_vcc3v3: vcc3v3 {
--		compatible = "regulator-fixed";
--		regulator-name = "vcc3v3";
--		regulator-min-microvolt = <3300000>;
--		regulator-max-microvolt = <3300000>;
-+	wifi_pwrseq: wifi-pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		clocks = <&rtc 1>;
-+		clock-names = "ext_clock";
-+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* WL-PMU-EN: PL2 */
- 	};
- };
- 
-@@ -34,10 +34,34 @@
- 	status = "okay";
- };
- 
-+&mmc1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc1_pins>;
-+	vmmc-supply = <&reg_dcdc1>;
-+	/*
-+	 * Schematic shows both dldo4 and eldo1 connected for vcc-io-wifi, but
-+	 * dldo4 connection shows DNP(Do Not Populate) and eldo1 connected with
-+	 * 0Ohm register to vcc-io-wifi so eldo1 is used.
-+	 */
-+	vqmmc-supply = <&reg_eldo1>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+
-+	brcmf: wifi <at> 1 {
-+		reg = <1>;
-+		compatible = "brcm,bcm4329-fmac";
-+		interrupt-parent = <&r_pio>;
-+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>;	/* WL-WAKE-AP: PL3 */
-+		interrupt-names = "host-wake";
-+	};
-+};
-+
- &mmc2 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&mmc2_pins>;
--	vmmc-supply = <&reg_vcc3v3>;
-+	vmmc-supply = <&reg_dcdc1>;
- 	bus-width = <8>;
- 	non-removable;
- 	cap-mmc-hw-reset;
-@@ -48,9 +72,138 @@
- 	status = "okay";
- };
- 
-+&r_rsb {
-+	status = "okay";
-+
-+	axp803: pmic <at> 3a3 {
-+		compatible = "x-powers,axp803";
-+		reg = <0x3a3>;
-+		interrupt-parent = <&r_intc>;
-+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+		x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
-+	};
-+};
-+
-+#include "axp803.dtsi"
-+
-+&reg_aldo1 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <2800000>;
-+	regulator-max-microvolt = <2800000>;
-+	regulator-name = "avdd-csi";
-+};
-+
-+&reg_aldo2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1800000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-pl";
-+};
-+
-+&reg_aldo3 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <3000000>;
-+	regulator-max-microvolt = <3000000>;
-+	regulator-name = "vcc-pll-avcc";
-+};
-+
-+&reg_dcdc1 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-3v3";
-+};
-+
-+&reg_dcdc2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1040000>;
-+	regulator-max-microvolt = <1300000>;
-+	regulator-name = "vdd-cpux";
-+};
-+
-+/* DCDC3 is polyphased with DCDC2 */
-+
-+&reg_dcdc5 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1500000>;
-+	regulator-max-microvolt = <1500000>;
-+	regulator-name = "vcc-dram";
-+};
-+
-+&reg_dcdc6 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1100000>;
-+	regulator-max-microvolt = <1100000>;
-+	regulator-name = "vdd-sys";
-+};
-+
-+&reg_dldo1 {
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-hdmi-dsi-sensor";
-+};
-+
-+&reg_dldo2 {
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-mipi";
-+};
-+
-+&reg_dldo3 {
-+	regulator-min-microvolt = <2800000>;
-+	regulator-max-microvolt = <2800000>;
-+	regulator-name = "dovdd-csi";
-+};
-+
-+&reg_dldo4 {
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-wifi-io";
-+};
-+
-+&reg_drivevbus {
-+	regulator-name = "usb0-vbus";
-+	status = "okay";
-+};
-+
-+&reg_eldo1 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1800000>;
-+	regulator-max-microvolt = <1800000>;
-+	regulator-name = "cpvdd";
-+};
-+
-+&reg_eldo3 {
-+	regulator-min-microvolt = <1800000>;
-+	regulator-max-microvolt = <1800000>;
-+	regulator-name = "dvdd-csi";
-+};
-+
-+&reg_fldo1 {
-+	regulator-min-microvolt = <1200000>;
-+	regulator-max-microvolt = <1200000>;
-+	regulator-name = "vcc-1v2-hsic";
-+};
-+
-+/*
-+ * The A64 chip cannot work without this regulator off, although
-+ * it seems to be only driving the AR100 core.
-+ * Maybe we don't still know well about CPUs domain.
-+ */
-+&reg_fldo2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1100000>;
-+	regulator-max-microvolt = <1100000>;
-+	regulator-name = "vdd-cpus";
-+};
-+
-+&reg_rtc_ldo {
-+	regulator-name = "vcc-rtc";
-+};
-+
- &uart0 {
- 	pinctrl-names = "default";
--	pinctrl-0 = <&uart0_pins_a>;
-+	pinctrl-0 = <&uart0_pb_pins>;
- 	status = "okay";
- };
- 
-@@ -61,5 +214,6 @@
- 
- &usbphy {
- 	usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
-+	usb0_vbus-supply = <&reg_drivevbus>;
- 	status = "okay";
- };
-diff --git a/arch/arm/dts/sun50i-a64-bananapi-m64.dts b/arch/arm/dts/sun50i-a64-bananapi-m64.dts
-index 0716b14411..ef1c90401b 100644
---- a/arch/arm/dts/sun50i-a64-bananapi-m64.dts
-+++ b/arch/arm/dts/sun50i-a64-bananapi-m64.dts
-@@ -60,6 +60,17 @@
- 		stdout-path = "serial0:115200n8";
- 	};
- 
-+	hdmi-connector {
-+		compatible = "hdmi-connector";
-+		type = "a";
-+
-+		port {
-+			hdmi_con_in: endpoint {
-+				remote-endpoint = <&hdmi_out_con>;
-+			};
-+		};
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
-@@ -86,6 +97,10 @@
- 	};
- };
- 
-+&de {
-+	status = "okay";
-+};
-+
- &ehci0 {
- 	status = "okay";
- };
-@@ -103,6 +118,17 @@
- 	status = "okay";
- };
- 
-+&hdmi {
-+	hvcc-supply = <&reg_dldo1>;
-+	status = "okay";
-+};
-+
-+&hdmi_out {
-+	hdmi_out_con: endpoint {
-+		remote-endpoint = <&hdmi_con_in>;
-+	};
-+};
-+
- &i2c1 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&i2c1_pins>;
-@@ -151,7 +177,7 @@
- 
- &mmc2 {
- 	pinctrl-names = "default";
--	pinctrl-0 = <&mmc2_pins>;
-+	pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
- 	vmmc-supply = <&reg_dcdc1>;
- 	bus-width = <8>;
- 	non-removable;
-@@ -296,9 +322,13 @@
- 	regulator-name = "vcc-rtc";
- };
- 
-+&simplefb_hdmi {
-+	vcc-hdmi-supply = <&reg_dldo1>;
-+};
-+
- &uart0 {
- 	pinctrl-names = "default";
--	pinctrl-0 = <&uart0_pins_a>;
-+	pinctrl-0 = <&uart0_pb_pins>;
- 	status = "okay";
- };
- 
-diff --git a/arch/arm/dts/sun50i-a64-nanopi-a64.dts b/arch/arm/dts/sun50i-a64-nanopi-a64.dts
-index e2dce48fa2..31884dbc88 100644
---- a/arch/arm/dts/sun50i-a64-nanopi-a64.dts
-+++ b/arch/arm/dts/sun50i-a64-nanopi-a64.dts
-@@ -51,12 +51,44 @@
- 	compatible = "friendlyarm,nanopi-a64", "allwinner,sun50i-a64";
- 
- 	aliases {
-+		ethernet0 = &emac;
- 		serial0 = &uart0;
- 	};
- 
- 	chosen {
- 		stdout-path = "serial0:115200n8";
- 	};
-+
-+	hdmi-connector {
-+		compatible = "hdmi-connector";
-+		type = "a";
-+
-+		port {
-+			hdmi_con_in: endpoint {
-+				remote-endpoint = <&hdmi_out_con>;
-+			};
-+		};
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		blue {
-+			label = "nanopi-a64:blue:status";
-+			gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
-+		};
-+	};
-+
-+	wifi_pwrseq: wifi_pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		clocks = <&rtc 1>;
-+		clock-names = "ext_clock";
-+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
-+	};
-+};
-+
-+&de {
-+	status = "okay";
- };
- 
- &ehci0 {
-@@ -67,6 +99,26 @@
- 	status = "okay";
- };
- 
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&rgmii_pins>;
-+	phy-mode = "rgmii";
-+	phy-handle = <&ext_rgmii_phy>;
-+	phy-supply = <&reg_dcdc1>;
-+	status = "okay";
-+};
-+
-+&hdmi {
-+	hvcc-supply = <&reg_dldo1>;
-+	status = "okay";
-+};
-+
-+&hdmi_out {
-+	hdmi_out_con: endpoint {
-+		remote-endpoint = <&hdmi_con_in>;
-+	};
-+};
-+
- /* i2c1 connected with gpio headers like pine64, bananapi */
- &i2c1 {
- 	pinctrl-names = "default";
-@@ -78,6 +130,13 @@
- 	bias-pull-up;
- };
- 
-+&mdio {
-+	ext_rgmii_phy: ethernet-phy <at> 1 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <7>;
-+	};
-+};
-+
- &mmc0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&mmc0_pins>;
-@@ -88,6 +147,24 @@
- 	status = "okay";
- };
- 
-+&mmc1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc1_pins>;
-+	vmmc-supply = <&reg_dcdc1>;
-+	vqmmc-supply = <&reg_dldo4>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+
-+	rtl8189etv: wifi <at> 1 {
-+		reg = <1>;
-+		interrupt-parent = <&r_pio>;
-+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
-+		interrupt-names = "host-wake";
-+	};
-+};
-+
- &ohci0 {
- 	status = "okay";
- };
-@@ -125,9 +202,9 @@
- 
- &reg_dcdc1 {
- 	regulator-always-on;
--	regulator-min-microvolt = <3000000>;
--	regulator-max-microvolt = <3000000>;
--	regulator-name = "vcc-3v";
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-3v3";
- };
- 
- &reg_dcdc2 {
-@@ -195,9 +272,13 @@
- 	regulator-name = "vcc-rtc";
- };
- 
-+&simplefb_hdmi {
-+	vcc-hdmi-supply = <&reg_dldo1>;
-+};
-+
- &uart0 {
- 	pinctrl-names = "default";
--	pinctrl-0 = <&uart0_pins_a>;
-+	pinctrl-0 = <&uart0_pb_pins>;
- 	status = "okay";
- };
- 
-diff --git a/arch/arm/dts/sun50i-a64-olinuxino.dts b/arch/arm/dts/sun50i-a64-olinuxino.dts
-index 3b3081b10e..f7a4bccaa5 100644
---- a/arch/arm/dts/sun50i-a64-olinuxino.dts
-+++ b/arch/arm/dts/sun50i-a64-olinuxino.dts
-@@ -51,6 +51,7 @@
- 	compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64";
- 
- 	aliases {
-+		ethernet0 = &emac;
- 		serial0 = &uart0;
- 	};
- 
-@@ -58,12 +59,74 @@
- 		stdout-path = "serial0:115200n8";
- 	};
- 
-+	hdmi-connector {
-+		compatible = "hdmi-connector";
-+		type = "a";
-+
-+		port {
-+			hdmi_con_in: endpoint {
-+				remote-endpoint = <&hdmi_out_con>;
-+			};
-+		};
-+	};
-+
-+	reg_usb1_vbus: usb1-vbus {
-+		compatible = "regulator-fixed";
-+		regulator-name = "usb1-vbus";
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		regulator-boot-on;
-+		enable-active-high;
-+		gpio = <&pio 6 9 GPIO_ACTIVE_HIGH>; /* PG9 */
-+		status = "okay";
-+	};
-+
- 	wifi_pwrseq: wifi_pwrseq {
- 		compatible = "mmc-pwrseq-simple";
- 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
- 	};
- };
- 
-+&de {
-+	status = "okay";
-+};
-+
-+&ehci0 {
-+	status = "okay";
-+};
-+
-+&ehci1 {
-+	status = "okay";
-+};
-+
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&rgmii_pins>;
-+	phy-mode = "rgmii";
-+	phy-handle = <&ext_rgmii_phy>;
-+	phy-supply = <&reg_dcdc1>;
-+	allwinner,tx-delay-ps = <600>;
-+	status = "okay";
-+};
-+
-+&hdmi {
-+	hvcc-supply = <&reg_dldo1>;
-+	status = "okay";
-+};
-+
-+&hdmi_out {
-+	hdmi_out_con: endpoint {
-+		remote-endpoint = <&hdmi_con_in>;
-+	};
-+};
-+
-+&mdio {
-+	ext_rgmii_phy: ethernet-phy <at> 1 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <1>;
-+	};
-+};
-+
- &mmc0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&mmc0_pins>;
-@@ -92,6 +155,14 @@
- 	};
- };
- 
-+&ohci0 {
-+	status = "okay";
-+};
-+
-+&ohci1 {
-+	status = "okay";
-+};
-+
- &r_rsb {
- 	status = "okay";
- 
-@@ -100,6 +171,7 @@
- 		reg = <0x3a3>;
- 		interrupt-parent = <&r_intc>;
- 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+		x-powers,drive-vbus-en;	/* set N_VBUSEN as output pin */
- 	};
- };
- 
-@@ -142,10 +214,14 @@
- 
- /* DCDC3 is polyphased with DCDC2 */
- 
-+/*
-+ * The board uses DDR3L DRAM chips. 1.36V is the closest to the nominal
-+ * 1.35V that the PMIC can drive.
-+ */
- &reg_dcdc5 {
- 	regulator-always-on;
--	regulator-min-microvolt = <1500000>;
--	regulator-max-microvolt = <1500000>;
-+	regulator-min-microvolt = <1360000>;
-+	regulator-max-microvolt = <1360000>;
- 	regulator-name = "vcc-ddr3";
- };
- 
-@@ -180,6 +256,11 @@
- 	regulator-name = "vcc-wifi-io";
- };
- 
-+&reg_drivevbus {
-+	regulator-name = "usb0-vbus";
-+	status = "okay";
-+};
-+
- &reg_eldo1 {
- 	regulator-min-microvolt = <1800000>;
- 	regulator-max-microvolt = <1800000>;
-@@ -214,8 +295,24 @@
- 	regulator-name = "vcc-rtc";
- };
- 
-+&simplefb_hdmi {
-+	vcc-hdmi-supply = <&reg_dldo1>;
-+};
-+
- &uart0 {
- 	pinctrl-names = "default";
--	pinctrl-0 = <&uart0_pins_a>;
-+	pinctrl-0 = <&uart0_pb_pins>;
-+	status = "okay";
-+};
-+
-+&usb_otg {
-+	dr_mode = "otg";
-+	status = "okay";
-+};
-+
-+&usbphy {
- 	status = "okay";
-+	usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
-+	usb0_vbus-supply = <&reg_drivevbus>;
-+	usb1_vbus-supply = <&reg_usb1_vbus>;
- };
-diff --git a/arch/arm/dts/sun50i-a64-orangepi-win.dts b/arch/arm/dts/sun50i-a64-orangepi-win.dts
-index bf42690a33..b0c64f7579 100644
---- a/arch/arm/dts/sun50i-a64-orangepi-win.dts
-+++ b/arch/arm/dts/sun50i-a64-orangepi-win.dts
-@@ -1,5 +1,6 @@
- /*
-  * Copyright (C) 2017 Jagan Teki <jteki <at> openedev.com>
-+ * Copyright (C) 2017-2018 Samuel Holland <samuel <at> sholland.org>
-  *
-  * This file is dual-licensed: you can use it either under the terms
-  * of the GPL or the X11 license, at your option. Note that this dual
-@@ -51,23 +52,127 @@
- 	compatible = "xunlong,orangepi-win", "allwinner,sun50i-a64";
- 
- 	aliases {
-+		ethernet0 = &emac;
- 		serial0 = &uart0;
-+		serial1 = &uart1;
-+		serial2 = &uart2;
-+		serial3 = &uart3;
-+		serial4 = &uart4;
- 	};
- 
- 	chosen {
- 		stdout-path = "serial0:115200n8";
- 	};
-+
-+	hdmi-connector {
-+		compatible = "hdmi-connector";
-+		type = "a";
-+
-+		port {
-+			hdmi_con_in: endpoint {
-+				remote-endpoint = <&hdmi_out_con>;
-+			};
-+		};
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		status {
-+			label = "orangepi:green:status";
-+			gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
-+		};
-+	};
-+
-+	reg_gmac_3v3: gmac-3v3 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "gmac-3v3";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		regulator-boot-on;
-+		enable-active-high;
-+		gpio = <&pio 3 14 GPIO_ACTIVE_HIGH>; /* PD14 */
-+		status = "okay";
-+	};
-+
-+	reg_usb1_vbus: usb1-vbus {
-+		compatible = "regulator-fixed";
-+		regulator-name = "usb1-vbus";
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		regulator-boot-on;
-+		enable-active-high;
-+		gpio = <&pio 3 7 GPIO_ACTIVE_HIGH>; /* PD7 */
-+		status = "okay";
-+	};
-+
-+	wifi_pwrseq: wifi_pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
-+	};
-+};
-+
-+&de {
-+	status = "okay";
-+};
-+
-+&ehci0 {
-+	status = "okay";
- };
- 
- &ehci1 {
- 	status = "okay";
- };
- 
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&rgmii_pins>;
-+	phy-mode = "rgmii";
-+	phy-handle = <&ext_rgmii_phy>;
-+	phy-supply = <&reg_gmac_3v3>;
-+	status = "okay";
-+};
-+
-+&hdmi {
-+	hvcc-supply = <&reg_dldo1>;
-+	status = "okay";
-+};
-+
-+&hdmi_out {
-+	hdmi_out_con: endpoint {
-+		remote-endpoint = <&hdmi_con_in>;
-+	};
-+};
-+
-+&mdio {
-+	ext_rgmii_phy: ethernet-phy <at> 1 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <1>;
-+	};
-+};
-+
- &mmc0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&mmc0_pins>;
- 	vmmc-supply = <&reg_dcdc1>;
--	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
-+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
-+	disable-wp;
-+	bus-width = <4>;
-+	status = "okay";
-+};
-+
-+&mmc1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc1_pins>;
-+	vmmc-supply = <&reg_dldo2>;
-+	vqmmc-supply = <&reg_dldo4>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+};
-+
-+&ohci0 {
- 	status = "okay";
- };
- 
-@@ -89,9 +194,8 @@
- #include "axp803.dtsi"
- 
- &reg_aldo1 {
--	regulator-always-on;
--	regulator-min-microvolt = <1800000>;
--	regulator-max-microvolt = <3300000>;
-+	regulator-min-microvolt = <2800000>;
-+	regulator-max-microvolt = <2800000>;
- 	regulator-name = "afvcc-csi";
- };
- 
-@@ -163,12 +267,23 @@
- 	regulator-name = "vcc-wifi-io";
- };
- 
-+&reg_drivevbus {
-+	regulator-name = "usb0-vbus";
-+	status = "okay";
-+};
-+
- &reg_eldo1 {
- 	regulator-min-microvolt = <1800000>;
- 	regulator-max-microvolt = <1800000>;
- 	regulator-name = "cpvdd";
- };
- 
-+&reg_eldo3 {
-+	regulator-min-microvolt = <1500000>;
-+	regulator-max-microvolt = <1800000>;
-+	regulator-name = "dvdd-csi";
-+};
-+
- &reg_fldo1 {
- 	regulator-min-microvolt = <1200000>;
- 	regulator-max-microvolt = <1200000>;
-@@ -191,13 +306,65 @@
- 	regulator-name = "vcc-rtc";
- };
- 
-+&simplefb_hdmi {
-+	vcc-hdmi-supply = <&reg_dldo1>;
-+};
-+
-+&spi0 {
-+	status = "okay";
-+
-+	spi-flash <at> 0 {
-+		compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
-+		reg = <0>;
-+		spi-max-frequency = <80000000>;
-+		m25p,fast-read;
-+		status = "okay";
-+	};
-+};
-+
-+/* On debug connector */
- &uart0 {
- 	pinctrl-names = "default";
--	pinctrl-0 = <&uart0_pins_a>;
-+	pinctrl-0 = <&uart0_pb_pins>;
- 	status = "okay";
- };
- 
--&usbphy {
-+/* Bluetooth */
-+&uart1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
-+	status = "okay";
-+};
-+
-+/* On Pi-2 connector, RTS/CTS optional */
-+&uart2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart2_pins>;
-+	status = "disabled";
-+};
-+
-+/* On Pi-2 connector, RTS/CTS optional */
-+&uart3 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart3_pins>;
-+	status = "disabled";
-+};
-+
-+/* On Pi-2 connector (labeled for SPI1), RTS/CTS optional */
-+&uart4 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart4_pins>;
-+	status = "disabled";
-+};
-+
-+&usb_otg {
-+	dr_mode = "otg";
- 	status = "okay";
- };
- 
-+&usbphy {
-+	usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
-+	usb0_vbus-supply = <&reg_drivevbus>;
-+	usb1_vbus-supply = <&reg_usb1_vbus>;
-+	status = "okay";
-+};
-diff --git a/arch/arm/dts/sun50i-a64-pine64.dts b/arch/arm/dts/sun50i-a64-pine64.dts
-index a75825798a..c077b6c1f4 100644
---- a/arch/arm/dts/sun50i-a64-pine64.dts
-+++ b/arch/arm/dts/sun50i-a64-pine64.dts
-@@ -62,6 +62,21 @@
- 	chosen {
- 		stdout-path = "serial0:115200n8";
- 	};
-+
-+	hdmi-connector {
-+		compatible = "hdmi-connector";
-+		type = "a";
-+
-+		port {
-+			hdmi_con_in: endpoint {
-+				remote-endpoint = <&hdmi_out_con>;
-+			};
-+		};
-+	};
-+};
-+
-+&de {
-+	status = "okay";
- };
- 
- &ehci0 {
-@@ -82,6 +97,17 @@
- 
- };
- 
-+&hdmi {
-+	hvcc-supply = <&reg_dldo1>;
-+	status = "okay";
-+};
-+
-+&hdmi_out {
-+	hdmi_out_con: endpoint {
-+		remote-endpoint = <&hdmi_con_in>;
-+	};
-+};
-+
- &i2c1 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&i2c1_pins>;
-@@ -229,6 +255,10 @@
- 	regulator-name = "vcc-rtc";
- };
- 
-+&simplefb_hdmi {
-+	vcc-hdmi-supply = <&reg_dldo1>;
-+};
-+
- /* On Euler connector */
- &spdif {
- 	status = "disabled";
-@@ -237,7 +267,7 @@
- /* On Exp and Euler connectors */
- &uart0 {
- 	pinctrl-names = "default";
--	pinctrl-0 = <&uart0_pins_a>;
-+	pinctrl-0 = <&uart0_pb_pins>;
- 	status = "okay";
- };
- 
-diff --git a/arch/arm/dts/sun50i-a64-sopine-baseboard.dts b/arch/arm/dts/sun50i-a64-sopine-baseboard.dts
-index abe179de35..53fcc9098d 100644
---- a/arch/arm/dts/sun50i-a64-sopine-baseboard.dts
-+++ b/arch/arm/dts/sun50i-a64-sopine-baseboard.dts
-@@ -61,6 +61,17 @@
- 		stdout-path = "serial0:115200n8";
- 	};
- 
-+	hdmi-connector {
-+		compatible = "hdmi-connector";
-+		type = "a";
-+
-+		port {
-+			hdmi_con_in: endpoint {
-+				remote-endpoint = <&hdmi_out_con>;
-+			};
-+		};
-+	};
-+
- 	reg_vcc1v8: vcc1v8 {
- 		compatible = "regulator-fixed";
- 		regulator-name = "vcc1v8";
-@@ -69,6 +80,10 @@
- 	};
- };
- 
-+&de {
-+	status = "okay";
-+};
-+
- &ehci0 {
- 	status = "okay";
- };
-@@ -86,6 +101,17 @@
- 	status = "okay";
- };
- 
-+&hdmi {
-+	hvcc-supply = <&reg_dldo1>;
-+	status = "okay";
-+};
-+
-+&hdmi_out {
-+	hdmi_out_con: endpoint {
-+		remote-endpoint = <&hdmi_con_in>;
-+	};
-+};
-+
- &mdio {
- 	ext_rgmii_phy: ethernet-phy <at> 1 {
- 		compatible = "ethernet-phy-ieee802.3-c22";
-@@ -134,9 +160,13 @@
- 	regulator-name = "vcc-wifi";
- };
- 
-+&simplefb_hdmi {
-+	vcc-hdmi-supply = <&reg_dldo1>;
-+};
-+
- &uart0 {
- 	pinctrl-names = "default";
--	pinctrl-0 = <&uart0_pins_a>;
-+	pinctrl-0 = <&uart0_pb_pins>;
- 	status = "okay";
- };
- 
-diff --git a/arch/arm/dts/sun50i-a64-sopine.dtsi b/arch/arm/dts/sun50i-a64-sopine.dtsi
-index 43418bd881..6723b8695e 100644
---- a/arch/arm/dts/sun50i-a64-sopine.dtsi
-+++ b/arch/arm/dts/sun50i-a64-sopine.dtsi
-@@ -45,6 +45,8 @@
- 
- #include "sun50i-a64.dtsi"
- 
-+#include <dt-bindings/gpio/gpio.h>
-+
- &mmc0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&mmc0_pins>;
-@@ -52,6 +54,7 @@
- 	non-removable;
- 	disable-wp;
- 	bus-width = <4>;
-+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
- 	status = "okay";
- };
- 
-@@ -66,6 +69,18 @@
- 	};
- };
- 
-+&spi0  {
-+	status = "okay";
-+
-+	flash <at> 0 {
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		compatible = "jedec,spi-nor";
-+		reg = <0>;
-+		spi-max-frequency = <40000000>;
-+	};
-+};
-+
- #include "axp803.dtsi"
- 
- &reg_aldo2 {
-diff --git a/arch/arm/dts/sun50i-a64.dtsi b/arch/arm/dts/sun50i-a64.dtsi
-index 7a083637c4..f3a66f8882 100644
---- a/arch/arm/dts/sun50i-a64.dtsi
-+++ b/arch/arm/dts/sun50i-a64.dtsi
-@@ -43,9 +43,12 @@
-  */
- 
- #include <dt-bindings/clock/sun50i-a64-ccu.h>
-+#include <dt-bindings/clock/sun8i-de2.h>
- #include <dt-bindings/clock/sun8i-r-ccu.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/reset/sun50i-a64-ccu.h>
-+#include <dt-bindings/reset/sun8i-de2.h>
-+#include <dt-bindings/reset/sun8i-r-ccu.h>
- 
- / {
- 	interrupt-parent = <&gic>;
-@@ -57,17 +60,21 @@
- 		#size-cells = <1>;
- 		ranges;
- 
--/*
-- * The pipeline mixer0-lcd0 depends on clock CLK_MIXER0 from DE2 CCU.
-- * However there is no support for this clock on A64 yet, so we depend
-- * on the upstream clocks here to keep them (and thus CLK_MIXER0) up.
-- */
- 		simplefb_lcd: framebuffer-lcd {
- 			compatible = "allwinner,simple-framebuffer",
- 				     "simple-framebuffer";
- 			allwinner,pipeline = "mixer0-lcd0";
- 			clocks = <&ccu CLK_TCON0>,
--				 <&ccu CLK_DE>, <&ccu CLK_BUS_DE>;
-+				 <&display_clocks CLK_MIXER0>;
-+			status = "disabled";
-+		};
-+
-+		simplefb_hdmi: framebuffer-hdmi {
-+			compatible = "allwinner,simple-framebuffer",
-+				     "simple-framebuffer";
-+			allwinner,pipeline = "mixer1-lcd1-hdmi";
-+			clocks = <&display_clocks CLK_MIXER1>,
-+				 <&ccu CLK_TCON1>, <&ccu CLK_HDMI>;
- 			status = "disabled";
- 		};
- 	};
-@@ -81,6 +88,7 @@
- 			device_type = "cpu";
- 			reg = <0>;
- 			enable-method = "psci";
-+			next-level-cache = <&L2>;
- 		};
- 
- 		cpu1: cpu <at> 1 {
-@@ -88,6 +96,7 @@
- 			device_type = "cpu";
- 			reg = <1>;
- 			enable-method = "psci";
-+			next-level-cache = <&L2>;
- 		};
- 
- 		cpu2: cpu <at> 2 {
-@@ -95,6 +104,7 @@
- 			device_type = "cpu";
- 			reg = <2>;
- 			enable-method = "psci";
-+			next-level-cache = <&L2>;
- 		};
- 
- 		cpu3: cpu <at> 3 {
-@@ -102,7 +112,20 @@
- 			device_type = "cpu";
- 			reg = <3>;
- 			enable-method = "psci";
-+			next-level-cache = <&L2>;
- 		};
-+
-+		L2: l2-cache {
-+			compatible = "cache";
-+			cache-level = <2>;
-+		};
-+	};
-+
-+	de: display-engine {
-+		compatible = "allwinner,sun50i-a64-display-engine";
-+		allwinner,pipelines = <&mixer0>,
-+				      <&mixer1>;
-+		status = "disabled";
- 	};
- 
- 	osc24M: osc24M_clk {
-@@ -168,10 +191,92 @@
- 		#size-cells = <1>;
- 		ranges;
- 
-+		de2 <at> 1000000 {
-+			compatible = "allwinner,sun50i-a64-de2";
-+			reg = <0x1000000 0x400000>;
-+			allwinner,sram = <&de2_sram 1>;
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges = <0 0x1000000 0x400000>;
-+
-+			display_clocks: clock <at> 0 {
-+				compatible = "allwinner,sun50i-a64-de2-clk";
-+				reg = <0x0 0x100000>;
-+				clocks = <&ccu CLK_DE>,
-+					 <&ccu CLK_BUS_DE>;
-+				clock-names = "mod",
-+					      "bus";
-+				resets = <&ccu RST_BUS_DE>;
-+				#clock-cells = <1>;
-+				#reset-cells = <1>;
-+			};
-+
-+			mixer0: mixer <at> 100000 {
-+				compatible = "allwinner,sun50i-a64-de2-mixer-0";
-+				reg = <0x100000 0x100000>;
-+				clocks = <&display_clocks CLK_BUS_MIXER0>,
-+					 <&display_clocks CLK_MIXER0>;
-+				clock-names = "bus",
-+					      "mod";
-+				resets = <&display_clocks RST_MIXER0>;
-+
-+				ports {
-+					#address-cells = <1>;
-+					#size-cells = <0>;
-+
-+					mixer0_out: port <at> 1 {
-+						reg = <1>;
-+
-+						mixer0_out_tcon0: endpoint {
-+							remote-endpoint = <&tcon0_in_mixer0>;
-+						};
-+					};
-+				};
-+			};
-+
-+			mixer1: mixer <at> 200000 {
-+				compatible = "allwinner,sun50i-a64-de2-mixer-1";
-+				reg = <0x200000 0x100000>;
-+				clocks = <&display_clocks CLK_BUS_MIXER1>,
-+					 <&display_clocks CLK_MIXER1>;
-+				clock-names = "bus",
-+					      "mod";
-+				resets = <&display_clocks RST_MIXER1>;
-+
-+				ports {
-+					#address-cells = <1>;
-+					#size-cells = <0>;
-+
-+					mixer1_out: port <at> 1 {
-+						reg = <1>;
-+
-+						mixer1_out_tcon1: endpoint {
-+							remote-endpoint = <&tcon1_in_mixer1>;
-+						};
-+					};
-+				};
-+			};
-+		};
-+
- 		syscon: syscon <at> 1c00000 {
--			compatible = "allwinner,sun50i-a64-system-controller",
--				"syscon";
-+			compatible = "allwinner,sun50i-a64-system-control";
- 			reg = <0x01c00000 0x1000>;
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges;
-+
-+			sram_c: sram <at> 18000 {
-+				compatible = "mmio-sram";
-+				reg = <0x00018000 0x28000>;
-+				#address-cells = <1>;
-+				#size-cells = <1>;
-+				ranges = <0 0x00018000 0x28000>;
-+
-+				de2_sram: sram-section <at> 0 {
-+					compatible = "allwinner,sun50i-a64-sram-c";
-+					reg = <0x0000 0x28000>;
-+				};
-+			};
- 		};
- 
- 		dma: dma-controller <at> 1c02000 {
-@@ -185,6 +290,75 @@
- 			#dma-cells = <1>;
- 		};
- 
-+		tcon0: lcd-controller <at> 1c0c000 {
-+			compatible = "allwinner,sun50i-a64-tcon-lcd",
-+				     "allwinner,sun8i-a83t-tcon-lcd";
-+			reg = <0x01c0c000 0x1000>;
-+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
-+			clock-names = "ahb", "tcon-ch0";
-+			clock-output-names = "tcon-pixel-clock";
-+			resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
-+			reset-names = "lcd", "lvds";
-+
-+			ports {
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+
-+				tcon0_in: port <at> 0 {
-+					#address-cells = <1>;
-+					#size-cells = <0>;
-+					reg = <0>;
-+
-+					tcon0_in_mixer0: endpoint <at> 0 {
-+						reg = <0>;
-+						remote-endpoint = <&mixer0_out_tcon0>;
-+					};
-+				};
-+
-+				tcon0_out: port <at> 1 {
-+					#address-cells = <1>;
-+					#size-cells = <0>;
-+					reg = <1>;
-+				};
-+			};
-+		};
-+
-+		tcon1: lcd-controller <at> 1c0d000 {
-+			compatible = "allwinner,sun50i-a64-tcon-tv",
-+				     "allwinner,sun8i-a83t-tcon-tv";
-+			reg = <0x01c0d000 0x1000>;
-+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&ccu CLK_BUS_TCON1>, <&ccu CLK_TCON1>;
-+			clock-names = "ahb", "tcon-ch1";
-+			resets = <&ccu RST_BUS_TCON1>;
-+			reset-names = "lcd";
-+
-+			ports {
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+
-+				tcon1_in: port <at> 0 {
-+					reg = <0>;
-+
-+					tcon1_in_mixer1: endpoint {
-+						remote-endpoint = <&mixer1_out_tcon1>;
-+					};
-+				};
-+
-+				tcon1_out: port <at> 1 {
-+					#address-cells = <1>;
-+					#size-cells = <0>;
-+					reg = <1>;
-+
-+					tcon1_out_hdmi: endpoint <at> 1 {
-+						reg = <1>;
-+						remote-endpoint = <&hdmi_in_tcon1>;
-+					};
-+				};
-+			};
-+		};
-+
- 		mmc0: mmc <at> 1c0f000 {
- 			compatible = "allwinner,sun50i-a64-mmc";
- 			reg = <0x01c0f000 0x1000>;
-@@ -227,6 +401,11 @@
- 			#size-cells = <0>;
- 		};
- 
-+		sid: eeprom <at> 1c14000 {
-+			compatible = "allwinner,sun50i-a64-sid";
-+			reg = <0x1c14000 0x400>;
-+		};
-+
- 		usb_otg: usb <at> 1c19000 {
- 			compatible = "allwinner,sun8i-a33-musb";
- 			reg = <0x01c19000 0x0400>;
-@@ -356,7 +535,7 @@
- 			};
- 
- 			mmc2_pins: mmc2-pins {
--				pins = "PC1", "PC5", "PC6", "PC8", "PC9",
-+				pins = "PC5", "PC6", "PC8", "PC9",
- 				       "PC10","PC11", "PC12", "PC13",
- 				       "PC14", "PC15", "PC16";
- 				function = "mmc2";
-@@ -364,6 +543,18 @@
- 				bias-pull-up;
- 			};
- 
-+			mmc2_ds_pin: mmc2-ds-pin {
-+				pins = "PC1";
-+				function = "mmc2";
-+				drive-strength = <30>;
-+				bias-pull-up;
-+			};
-+
-+			pwm_pin: pwm_pin {
-+				pins = "PD22";
-+				function = "pwm";
-+			};
-+
- 			rmii_pins: rmii_pins {
- 				pins = "PD10", "PD11", "PD13", "PD14", "PD17",
- 				       "PD18", "PD19", "PD20", "PD22", "PD23";
-@@ -394,7 +585,7 @@
- 				function = "spi1";
- 			};
- 
--			uart0_pins_a: uart0 {
-+			uart0_pb_pins: uart0-pb-pins {
- 				pins = "PB8", "PB9";
- 				function = "uart0";
- 			};
-@@ -474,15 +665,6 @@
- 			status = "disabled";
- 		};
- 
--		pwm: pwm <at> 1c21400 {
--			compatible = "allwinner,sun50i-a64-pwm",
--				     "allwinner,sun5i-a13-pwm";
--			reg = <0x01c21400 0x8>;
--			clocks = <&osc24M>;
--			#pwm-cells = <3>;
--			status = "disabled";
--		};
--
- 		uart0: serial <at> 1c28000 {
- 			compatible = "snps,dw-apb-uart";
- 			reg = <0x01c28000 0x400>;
-@@ -617,8 +799,6 @@
- 			clocks = <&ccu CLK_BUS_EMAC>;
- 			clock-names = "stmmaceth";
- 			status = "disabled";
--			#address-cells = <1>;
--			#size-cells = <0>;
- 
- 			mdio: mdio {
- 				compatible = "snps,dwmac-mdio";
-@@ -638,11 +818,69 @@
- 			#interrupt-cells = <3>;
- 		};
- 
-+		pwm: pwm <at> 1c21400 {
-+			compatible = "allwinner,sun50i-a64-pwm",
-+				     "allwinner,sun5i-a13-pwm";
-+			reg = <0x01c21400 0x400>;
-+			clocks = <&osc24M>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&pwm_pin>;
-+			#pwm-cells = <3>;
-+			status = "disabled";
-+		};
-+
-+		hdmi: hdmi <at> 1ee0000 {
-+			compatible = "allwinner,sun50i-a64-dw-hdmi",
-+				     "allwinner,sun8i-a83t-dw-hdmi";
-+			reg = <0x01ee0000 0x10000>;
-+			reg-io-width = <1>;
-+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
-+				 <&ccu CLK_HDMI>;
-+			clock-names = "iahb", "isfr", "tmds";
-+			resets = <&ccu RST_BUS_HDMI1>;
-+			reset-names = "ctrl";
-+			phys = <&hdmi_phy>;
-+			phy-names = "hdmi-phy";
-+			status = "disabled";
-+
-+			ports {
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+
-+				hdmi_in: port <at> 0 {
-+					reg = <0>;
-+
-+					hdmi_in_tcon1: endpoint {
-+						remote-endpoint = <&tcon1_out_hdmi>;
-+					};
-+				};
-+
-+				hdmi_out: port <at> 1 {
-+					reg = <1>;
-+				};
-+			};
-+		};
-+
-+		hdmi_phy: hdmi-phy <at> 1ef0000 {
-+			compatible = "allwinner,sun50i-a64-hdmi-phy";
-+			reg = <0x01ef0000 0x10000>;
-+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
-+				 <&ccu 7>;
-+			clock-names = "bus", "mod", "pll-0";
-+			resets = <&ccu RST_BUS_HDMI0>;
-+			reset-names = "phy";
-+			#phy-cells = <0>;
-+		};
-+
- 		rtc: rtc <at> 1f00000 {
- 			compatible = "allwinner,sun6i-a31-rtc";
- 			reg = <0x01f00000 0x54>;
- 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
- 				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-+			clock-output-names = "rtc-osc32k", "rtc-osc32k-out";
-+			clocks = <&osc32k>;
-+			#clock-cells = <1>;
- 		};
- 
- 		r_intc: interrupt-controller <at> 1f00c00 {
-@@ -664,6 +902,29 @@
- 			#reset-cells = <1>;
- 		};
- 
-+		r_i2c: i2c <at> 1f02400 {
-+			compatible = "allwinner,sun50i-a64-i2c",
-+				     "allwinner,sun6i-a31-i2c";
-+			reg = <0x01f02400 0x400>;
-+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&r_ccu CLK_APB0_I2C>;
-+			resets = <&r_ccu RST_APB0_I2C>;
-+			status = "disabled";
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		r_pwm: pwm <at> 1f03800 {
-+			compatible = "allwinner,sun50i-a64-pwm",
-+				     "allwinner,sun5i-a13-pwm";
-+			reg = <0x01f03800 0x400>;
-+			clocks = <&osc24M>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&r_pwm_pin>;
-+			#pwm-cells = <3>;
-+			status = "disabled";
-+		};
-+
- 		r_pio: pinctrl <at> 1f02c00 {
- 			compatible = "allwinner,sun50i-a64-r-pinctrl";
- 			reg = <0x01f02c00 0x400>;
-@@ -675,6 +936,16 @@
- 			interrupt-controller;
- 			#interrupt-cells = <3>;
- 
-+			r_i2c_pl89_pins: r-i2c-pl89-pins {
-+				pins = "PL8", "PL9";
-+				function = "s_i2c";
-+			};
-+
-+			r_pwm_pin: pwm {
-+				pins = "PL10";
-+				function = "s_pwm";
-+			};
-+
- 			r_rsb_pins: rsb {
- 				pins = "PL0", "PL1";
- 				function = "s_rsb";
--- 
-2.11.0
-
diff --git a/gnu/packages/patches/u-boot-pinebook-dts.patch b/gnu/packages/patches/u-boot-pinebook-dts.patch
deleted file mode 100644
index 48c004fdf..000000000
--- a/gnu/packages/patches/u-boot-pinebook-dts.patch
+++ /dev/null
@@ -1,388 +0,0 @@
-From b972831c3cd24f3c9bb0995ed61db8f8239f3391 Mon Sep 17 00:00:00 2001
-From: Vasily Khoruzhick <anarsoul <at> gmail.com>
-Date: Mon, 5 Nov 2018 20:24:31 -0800
-Subject: [PATCH 10/13] sunxi: DT: add support for Pinebook
-
-Pinebook is a laptop produced by Pine64, with USB-connected keyboard,
-USB-connected touchpad and an eDP LCD panel connected via a RGB-eDP
-bridge from Analogix.
-
-Signed-off-by: Vasily Khoruzhick <anarsoul <at> gmail.com>
-Acked-by: Maxime Ripard <maxime.ripard <at> bootlin.com>
-Tested-by: Maxime Ripard <maxime.ripard <at> bootlin.com>
-Cc: Vagrant Cascadian <vagrant <at> debian.org>
-Reviewed-by: Jagan Teki <jagan <at> openedev.com>
----
- arch/arm/dts/Makefile                        |   1 +
- arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi |  15 ++
- arch/arm/dts/sun50i-a64-pinebook.dts         | 294 +++++++++++++++++++++++++++
- configs/pinebook_defconfig                   |  22 ++
- 4 files changed, 332 insertions(+)
- create mode 100644 arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
- create mode 100644 arch/arm/dts/sun50i-a64-pinebook.dts
- create mode 100644 configs/pinebook_defconfig
-
-diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
-index 3093c1185e..eae6b9ee5d 100644
---- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -406,6 +406,7 @@ dtb-$(CONFIG_MACH_SUN50I) += \
- 	sun50i-a64-orangepi-win.dtb \
- 	sun50i-a64-pine64-plus.dtb \
- 	sun50i-a64-pine64.dtb \
-+	sun50i-a64-pinebook.dtb \
- 	sun50i-a64-sopine-baseboard.dtb
- dtb-$(CONFIG_MACH_SUN9I) += \
- 	sun9i-a80-optimus.dtb \
-diff --git a/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi b/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
-new file mode 100644
-index 0000000000..a99b7171d0
---- /dev/null
-+++ b/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
-@@ -0,0 +1,15 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (C) 2018 Vasily Khoruzhick <anarsoul <at> gmail.com>
-+ *
-+ */
-+
-+/* The ANX6345 eDP-bridge is on r_i2c */
-+&r_i2c {
-+	anx6345: edp-bridge <at> 38 {
-+		compatible = "analogix,anx6345";
-+		reg = <0x38>;
-+		reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
-+		status = "okay";
-+	};
-+};
-diff --git a/arch/arm/dts/sun50i-a64-pinebook.dts b/arch/arm/dts/sun50i-a64-pinebook.dts
-new file mode 100644
-index 0000000000..ec537c5297
---- /dev/null
-+++ b/arch/arm/dts/sun50i-a64-pinebook.dts
-@@ -0,0 +1,294 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (C) 2017 Icenowy Zheng <icenowy <at> aosc.xyz>
-+ * Copyright (C) 2018 Vasily Khoruzhick <anarsoul <at> gmail.com>
-+ *
-+ */
-+
-+/dts-v1/;
-+
-+#include "sun50i-a64.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/pwm/pwm.h>
-+
-+/ {
-+	model = "Pinebook";
-+	compatible = "pine64,pinebook", "allwinner,sun50i-a64";
-+
-+	aliases {
-+		serial0 = &uart0;
-+		ethernet0 = &rtl8723cs;
-+	};
-+
-+	vdd_bl: regulator <at> 0 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "bl-3v3";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
-+		enable-active-high;
-+	};
-+
-+	backlight: backlight {
-+		compatible = "pwm-backlight";
-+		pwms = <&pwm 0 50000 0>;
-+		brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>;
-+		default-brightness-level = <2>;
-+		enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
-+		power-supply = <&vdd_bl>;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+
-+		framebuffer-lcd {
-+			panel-supply = <&reg_dc1sw>;
-+			dvdd25-supply = <&reg_dldo2>;
-+			dvdd12-supply = <&reg_fldo1>;
-+		};
-+	};
-+
-+	gpio_keys {
-+		compatible = "gpio-keys";
-+
-+		lid_switch {
-+			label = "Lid Switch";
-+			gpios = <&r_pio 0 12 GPIO_ACTIVE_LOW>; /* PL12 */
-+			linux,input-type = <EV_SW>;
-+			linux,code = <SW_LID>;
-+			linux,can-disable;
-+			wakeup-source;
-+		};
-+	};
-+
-+	reg_vcc3v3: vcc3v3 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc3v3";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+	};
-+
-+	wifi_pwrseq: wifi_pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
-+	};
-+};
-+
-+&ehci0 {
-+	phys = <&usbphy 0>;
-+	phy-names = "usb";
-+	status = "okay";
-+};
-+
-+&ehci1 {
-+	status = "okay";
-+};
-+
-+&mmc0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc0_pins>;
-+	vmmc-supply = <&reg_dcdc1>;
-+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
-+	disable-wp;
-+	bus-width = <4>;
-+	status = "okay";
-+};
-+
-+&mmc1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc1_pins>;
-+	vmmc-supply = <&reg_dldo4>;
-+	vqmmc-supply = <&reg_eldo1>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+
-+	rtl8723cs: wifi <at> 1 {
-+		reg = <1>;
-+	};
-+};
-+
-+&mmc2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
-+	vmmc-supply = <&reg_dcdc1>;
-+	vqmmc-supply = <&reg_eldo1>;
-+	bus-width = <8>;
-+	non-removable;
-+	cap-mmc-hw-reset;
-+	mmc-hs200-1_8v;
-+	status = "okay";
-+};
-+
-+&ohci0 {
-+	phys = <&usbphy 0>;
-+	phy-names = "usb";
-+	status = "okay";
-+};
-+
-+&ohci1 {
-+	status = "okay";
-+};
-+
-+&pwm {
-+	status = "okay";
-+};
-+
-+&r_rsb {
-+	status = "okay";
-+
-+	axp803: pmic <at> 3a3 {
-+		compatible = "x-powers,axp803";
-+		reg = <0x3a3>;
-+		interrupt-parent = <&r_intc>;
-+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+	};
-+};
-+
-+/* The ANX6345 eDP-bridge is on r_i2c */
-+&r_i2c {
-+	clock-frequency = <100000>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&r_i2c_pl89_pins>;
-+	status = "okay";
-+};
-+
-+#include "axp803.dtsi"
-+
-+&reg_aldo1 {
-+	regulator-min-microvolt = <2800000>;
-+	regulator-max-microvolt = <2800000>;
-+	regulator-name = "vcc-csi";
-+};
-+
-+&reg_aldo2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1800000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-pl";
-+};
-+
-+&reg_aldo3 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <2700000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-pll-avcc";
-+};
-+
-+&reg_dc1sw {
-+	regulator-name = "vcc-lcd";
-+};
-+
-+&reg_dcdc1 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-3v3";
-+};
-+
-+&reg_dcdc2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1000000>;
-+	regulator-max-microvolt = <1300000>;
-+	regulator-name = "vdd-cpux";
-+};
-+
-+/* DCDC3 is polyphased with DCDC2 */
-+
-+&reg_dcdc5 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1200000>;
-+	regulator-max-microvolt = <1200000>;
-+	regulator-name = "vcc-dram";
-+};
-+
-+&reg_dcdc6 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1100000>;
-+	regulator-max-microvolt = <1100000>;
-+	regulator-name = "vdd-sys";
-+};
-+
-+&reg_dldo1 {
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-hdmi";
-+};
-+
-+&reg_dldo2 {
-+	regulator-min-microvolt = <2500000>;
-+	regulator-max-microvolt = <2500000>;
-+	regulator-name = "vcc-edp";
-+};
-+
-+&reg_dldo3 {
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "avdd-csi";
-+};
-+
-+&reg_dldo4 {
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-wifi";
-+};
-+
-+&reg_eldo1 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1800000>;
-+	regulator-max-microvolt = <1800000>;
-+	regulator-name = "cpvdd";
-+};
-+
-+&reg_eldo3 {
-+	regulator-min-microvolt = <1800000>;
-+	regulator-max-microvolt = <1800000>;
-+	regulator-name = "vdd-1v8-csi";
-+};
-+
-+&reg_fldo1 {
-+	regulator-min-microvolt = <1200000>;
-+	regulator-max-microvolt = <1200000>;
-+	regulator-name = "vcc-1v2-hsic";
-+};
-+
-+&reg_fldo2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1100000>;
-+	regulator-max-microvolt = <1100000>;
-+	regulator-name = "vdd-cpus";
-+};
-+
-+&reg_ldo_io0 {
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-usb";
-+	status = "okay";
-+};
-+
-+&reg_rtc_ldo {
-+	regulator-name = "vcc-rtc";
-+};
-+
-+&simplefb_hdmi {
-+	vcc-hdmi-supply = <&reg_dldo1>;
-+};
-+
-+&uart0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart0_pb_pins>;
-+	status = "okay";
-+};
-+
-+&usb_otg {
-+	dr_mode = "host";
-+};
-+
-+&usbphy {
-+	usb0_vbus-supply = <&reg_ldo_io0>;
-+	usb1_vbus-supply = <&reg_ldo_io0>;
-+	status = "okay";
-+};
-diff --git a/configs/pinebook_defconfig b/configs/pinebook_defconfig
-new file mode 100644
-index 0000000000..5294dbd2eb
---- /dev/null
-+++ b/configs/pinebook_defconfig
-@@ -0,0 +1,22 @@
-+CONFIG_ARM=y
-+CONFIG_ARCH_SUNXI=y
-+CONFIG_SPL=y
-+CONFIG_MACH_SUN50I=y
-+CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y
-+CONFIG_DRAM_CLK=552
-+CONFIG_DRAM_ZQ=3881949
-+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
-+CONFIG_R_I2C_ENABLE=y
-+# CONFIG_CMD_FLASH is not set
-+# CONFIG_SPL_DOS_PARTITION is not set
-+# CONFIG_SPL_EFI_PARTITION is not set
-+CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pinebook"
-+CONFIG_DM_REGULATOR=y
-+CONFIG_DM_REGULATOR_FIXED=y
-+CONFIG_DM_PWM=y
-+CONFIG_PWM_SUNXI=y
-+CONFIG_USB_EHCI_HCD=y
-+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
-+# CONFIG_USB_GADGET is not set
-+CONFIG_VIDEO_BRIDGE=y
-+CONFIG_VIDEO_BRIDGE_ANALOGIX_ANX6345=y
--- 
-2.11.0
-
diff --git a/gnu/packages/patches/u-boot-pinebook-mmc-calibration.patch b/gnu/packages/patches/u-boot-pinebook-mmc-calibration.patch
deleted file mode 100644
index 118bdf8e0..000000000
--- a/gnu/packages/patches/u-boot-pinebook-mmc-calibration.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From 20940ef2a397446a209350900d3bd618c3fd5b94 Mon Sep 17 00:00:00 2001
-From: Vasily Khoruzhick <anarsoul <at> gmail.com>
-Date: Mon, 5 Nov 2018 20:24:28 -0800
-Subject: [PATCH 07/13] mmc: sunxi: add support for automatic delay calibration
-
-A64 and H6 support automatic delay calibration and Linux driver uses it
-instead of hardcoded delays. Add support for it to u-boot driver.
-
-Fixes eMMC instability on Pinebook
-
-Signed-off-by: Vasily Khoruzhick <anarsoul <at> gmail.com>
-Acked-by: Maxime Ripard <maxime.ripard <at> bootlin.com>
-Tested-by: Maxime Ripard <maxime.ripard <at> bootlin.com>
-Reviewed-by: Andre Przywara <andre.przywara <at> arm.com>
-Cc: Vagrant Cascadian <vagrant <at> debian.org>
-Reviewed-by: Jagan Teki <jagan <at> openedev.com>
----
- arch/arm/include/asm/arch-sunxi/mmc.h |  6 +++++-
- drivers/mmc/sunxi_mmc.c               | 21 ++++++++++++++++++++-
- 2 files changed, 25 insertions(+), 2 deletions(-)
-
-diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h b/arch/arm/include/asm/arch-sunxi/mmc.h
-index d98c53faaa..f2deafddd2 100644
---- a/arch/arm/include/asm/arch-sunxi/mmc.h
-+++ b/arch/arm/include/asm/arch-sunxi/mmc.h
-@@ -46,7 +46,9 @@ struct sunxi_mmc {
- 	u32 cbda;		/* 0x94 */
- 	u32 res2[26];
- #if defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_MACH_SUN50I_H6)
--	u32 res3[64];
-+	u32 res3[17];
-+	u32 samp_dl;
-+	u32 res4[46];
- #endif
- 	u32 fifo;		/* 0x100 / 0x200 FIFO access address */
- };
-@@ -130,5 +132,7 @@ struct sunxi_mmc {
- #define SUNXI_MMC_COMMON_CLK_GATE		(1 << 16)
- #define SUNXI_MMC_COMMON_RESET			(1 << 18)
- 
-+#define SUNXI_MMC_CAL_DL_SW_EN		(0x1 << 7)
-+
- struct mmc *sunxi_mmc_init(int sdc_no);
- #endif /* _SUNXI_MMC_H */
-diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
-index 39f15eb423..147eb9b4d5 100644
---- a/drivers/mmc/sunxi_mmc.c
-+++ b/drivers/mmc/sunxi_mmc.c
-@@ -99,11 +99,16 @@ static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv, unsigned int hz)
- {
- 	unsigned int pll, pll_hz, div, n, oclk_dly, sclk_dly;
- 	bool new_mode = false;
-+	bool calibrate = false;
- 	u32 val = 0;
- 
- 	if (IS_ENABLED(CONFIG_MMC_SUNXI_HAS_NEW_MODE) && (priv->mmc_no == 2))
- 		new_mode = true;
- 
-+#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUN50I_H6)
-+	calibrate = true;
-+#endif
-+
- 	/*
- 	 * The MMC clock has an extra /2 post-divider when operating in the new
- 	 * mode.
-@@ -174,7 +179,11 @@ static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv, unsigned int hz)
- 		val = CCM_MMC_CTRL_MODE_SEL_NEW;
- 		setbits_le32(&priv->reg->ntsr, SUNXI_MMC_NTSR_MODE_SEL_NEW);
- #endif
--	} else {
-+	} else if (!calibrate) {
-+		/*
-+		 * Use hardcoded delay values if controller doesn't support
-+		 * calibration
-+		 */
- 		val = CCM_MMC_CTRL_OCLK_DLY(oclk_dly) |
- 			CCM_MMC_CTRL_SCLK_DLY(sclk_dly);
- 	}
-@@ -228,6 +237,16 @@ static int mmc_config_clock(struct sunxi_mmc_priv *priv, struct mmc *mmc)
- 	rval &= ~SUNXI_MMC_CLK_DIVIDER_MASK;
- 	writel(rval, &priv->reg->clkcr);
- 
-+#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUN50I_H6)
-+	/* A64 supports calibration of delays on MMC controller and we
-+	 * have to set delay of zero before starting calibration.
-+	 * Allwinner BSP driver sets a delay only in the case of
-+	 * using HS400 which is not supported by mainline U-Boot or
-+	 * Linux at the moment
-+	 */
-+	writel(SUNXI_MMC_CAL_DL_SW_EN, &priv->reg->samp_dl);
-+#endif
-+
- 	/* Re-enable Clock */
- 	rval |= SUNXI_MMC_CLK_ENABLE;
- 	writel(rval, &priv->reg->clkcr);
--- 
-2.11.0
-
diff --git a/gnu/packages/patches/u-boot-pinebook-r_i2c-controller.patch b/gnu/packages/patches/u-boot-pinebook-r_i2c-controller.patch
deleted file mode 100644
index 824a16b9d..000000000
--- a/gnu/packages/patches/u-boot-pinebook-r_i2c-controller.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From 31a4ac4d79d75baeede3edfa95515fd4169ef502 Mon Sep 17 00:00:00 2001
-From: Vasily Khoruzhick <anarsoul <at> gmail.com>
-Date: Mon, 5 Nov 2018 20:24:30 -0800
-Subject: [PATCH 09/13] sun50i: A64: add support for R_I2C controller
-
-Allwinner A64 has a I2C controller, which is in the R_ MMIO zone and has
-two groups of pinmuxes on PL bank, so it's called R_I2C.
-
-Add support for this I2C controller and the pinmux which doesn't conflict
-with RSB.
-
-Signed-off-by: Vasily Khoruzhick <anarsoul <at> gmail.com>
-Acked-by: Maxime Ripard <maxime.ripard <at> bootlin.com>
-Tested-by: Maxime Ripard <maxime.ripard <at> bootlin.com>
-Cc: Vagrant Cascadian <vagrant <at> debian.org>
-Acked-by: Jagan Teki <jagan <at> openedev.com>
----
- arch/arm/include/asm/arch-sunxi/gpio.h | 1 +
- arch/arm/mach-sunxi/Kconfig            | 1 +
- board/sunxi/board.c                    | 6 ++++++
- 3 files changed, 8 insertions(+)
-
-diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
-index 6a5eafc3d3..2daf23f6f5 100644
---- a/arch/arm/include/asm/arch-sunxi/gpio.h
-+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
-@@ -211,6 +211,7 @@ enum sunxi_gpio_number {
- #define SUN8I_H3_GPL_R_TWI	2
- #define SUN8I_A23_GPL_R_TWI	3
- #define SUN8I_GPL_R_UART	2
-+#define SUN50I_GPL_R_TWI	2
- 
- #define SUN9I_GPN_R_RSB		3
- 
-diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
-index 6277abc3cc..560dc9b25d 100644
---- a/arch/arm/mach-sunxi/Kconfig
-+++ b/arch/arm/mach-sunxi/Kconfig
-@@ -278,6 +278,7 @@ config MACH_SUN50I
- 	select ARM64
- 	select DM_I2C
- 	select PHY_SUN4I_USB
-+	select SUN6I_PRCM
- 	select SUNXI_DE2
- 	select SUNXI_GEN_SUN6I
- 	select SUPPORT_SPL
-diff --git a/board/sunxi/board.c b/board/sunxi/board.c
-index b196d48674..64ccbc7245 100644
---- a/board/sunxi/board.c
-+++ b/board/sunxi/board.c
-@@ -168,10 +168,16 @@ void i2c_init_board(void)
- #endif
- 
- #ifdef CONFIG_R_I2C_ENABLE
-+#ifdef CONFIG_MACH_SUN50I
-+	clock_twi_onoff(5, 1);
-+	sunxi_gpio_set_cfgpin(SUNXI_GPL(8), SUN50I_GPL_R_TWI);
-+	sunxi_gpio_set_cfgpin(SUNXI_GPL(9), SUN50I_GPL_R_TWI);
-+#else
- 	clock_twi_onoff(5, 1);
- 	sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN8I_H3_GPL_R_TWI);
- 	sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN8I_H3_GPL_R_TWI);
- #endif
-+#endif
- }
- 
- #if defined(CONFIG_ENV_IS_IN_MMC) && defined(CONFIG_ENV_IS_IN_FAT)
--- 
-2.11.0
-
diff --git a/gnu/packages/patches/u-boot-pinebook-syscon-node.patch b/gnu/packages/patches/u-boot-pinebook-syscon-node.patch
deleted file mode 100644
index 9289645be..000000000
--- a/gnu/packages/patches/u-boot-pinebook-syscon-node.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From ababb5920e8992c9bb7956df3cc85dc68d27dfe8 Mon Sep 17 00:00:00 2001
-From: Andre Przywara <andre.przywara <at> arm.com>
-Date: Mon, 29 Oct 2018 00:56:48 +0000
-Subject: [PATCH 04/13] sunxi: A64: Re-add syscon to DT node
-
-The sun50i-a64.dtsi changes introduced in Linux v4.19-rc1 changed the
-compatible name for the syscon controller, dropping the generic "syscon"
-fallback. Using this new DT node will make the Ethernet driver in every
-older kernel (or non-Linux kernels) fail to initialise the MAC device.
-
-To allow booting distribution kernels (from installer images via UEFI,
-for instance), re-add the syscon compatible string as a fallback. This
-works with both older and newer kernels.
-
-Signed-off-by: Andre Przywara <andre.przywara <at> arm.com>
-Acked-by: Maxime Ripard <maxime.ripard <at> bootlin.com>
-Reviewed-by: Jagan Teki <jagan <at> openedev.com>
----
- arch/arm/dts/sun50i-a64.dtsi | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
-diff --git a/arch/arm/dts/sun50i-a64.dtsi b/arch/arm/dts/sun50i-a64.dtsi
-index f3a66f8882..ff41abc96a 100644
---- a/arch/arm/dts/sun50i-a64.dtsi
-+++ b/arch/arm/dts/sun50i-a64.dtsi
-@@ -259,7 +259,8 @@
- 		};
- 
- 		syscon: syscon <at> 1c00000 {
--			compatible = "allwinner,sun50i-a64-system-control";
-+			compatible = "allwinner,sun50i-a64-system-control",
-+				"syscon";
- 			reg = <0x01c00000 0x1000>;
- 			#address-cells = <1>;
- 			#size-cells = <1>;
--- 
-2.11.0
-
diff --git a/gnu/packages/patches/u-boot-pinebook-video-bridge.patch b/gnu/packages/patches/u-boot-pinebook-video-bridge.patch
deleted file mode 100644
index 8c6ca8a99..000000000
--- a/gnu/packages/patches/u-boot-pinebook-video-bridge.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 8336a43792a103c13d939b3925cb75322911f7fb Mon Sep 17 00:00:00 2001
-From: Vasily Khoruzhick <anarsoul <at> gmail.com>
-Date: Mon, 5 Nov 2018 20:24:29 -0800
-Subject: [PATCH 08/13] dm: video: bridge: don't fail to activate bridge if
- reset or sleep GPIO is missing
-
-Both GPIOs are optional, so we shouldn't fail if any is missing.
-Without this fix reset is not deasserted if sleep GPIO is missing.
-
-Signed-off-by: Vasily Khoruzhick <anarsoul <at> gmail.com>
-Acked-by: Maxime Ripard <maxime.ripard <at> bootlin.com>
-Tested-by: Maxime Ripard <maxime.ripard <at> bootlin.com>
-Reviewed-by: Andre Przywara <andre.przywara <at> arm.com>
-Cc: Vagrant Cascadian <vagrant <at> debian.org>
----
- drivers/video/bridge/video-bridge-uclass.c | 16 +++++++++++-----
- 1 file changed, 11 insertions(+), 5 deletions(-)
-
-diff --git a/drivers/video/bridge/video-bridge-uclass.c b/drivers/video/bridge/video-bridge-uclass.c
-index cd4959cc71..5fecb4cfd5 100644
---- a/drivers/video/bridge/video-bridge-uclass.c
-+++ b/drivers/video/bridge/video-bridge-uclass.c
-@@ -106,13 +106,19 @@ static int video_bridge_pre_probe(struct udevice *dev)
- int video_bridge_set_active(struct udevice *dev, bool active)
- {
- 	struct video_bridge_priv *uc_priv = dev_get_uclass_priv(dev);
--	int ret;
-+	int ret = 0;
- 
- 	debug("%s: %d\n", __func__, active);
--	ret = dm_gpio_set_value(&uc_priv->sleep, !active);
--	if (ret)
--		return ret;
--	if (active) {
-+	if (uc_priv->sleep.dev) {
-+		ret = dm_gpio_set_value(&uc_priv->sleep, !active);
-+		if (ret)
-+			return ret;
-+	}
-+
-+	if (!active)
-+		return 0;
-+
-+	if (uc_priv->reset.dev) {
- 		ret = dm_gpio_set_value(&uc_priv->reset, true);
- 		if (ret)
- 			return ret;
--- 
-2.11.0
-
-- 
2.20.1

[signature.asc (application/pgp-signature, inline)]

Message #8 received at 34111 <at> debbugs.gnu.org (full text, mbox):

From: Ludovic Courtès <ludo <at> gnu.org>
To: Vagrant Cascadian <vagrant <at> debian.org>,
 Danny Milosavljevic <dannym <at> scratchpost.org>
Cc: 34111 <at> debbugs.gnu.org
Subject: Re: [bug#34111] [PATCH] gnu: u-boot: Update to 2019.01.
Date: Tue, 29 Jan 2019 23:32:13 +0100

Hello!

Vagrant Cascadian <vagrant <at> debian.org> skribis:

> * gnu/packages/bootloaders.scm (u-boot): Update to 2019.01.
>   (u-boot-tools): Disable CONFIG_SOUND in sandbox configs.
>   (u-boot-pinebook): Drop patches applied upstream.
> * gnu/packages/patches/u-boot-pinebook-*: Drop obsolete patches.
> * gnu/local.mk: Drop u-boot-pinebook patches.

Looks reasonable to me.  Danny, could you take a look and apply if it’s OK?

Thanks,
Ludo’.

Message #13 received at 34111-done <at> debbugs.gnu.org (full text, mbox):

From: Danny Milosavljevic <dannym <at> scratchpost.org>
To: Vagrant Cascadian <vagrant <at> debian.org>
Cc: 34111-done <at> debbugs.gnu.org
Subject: Re: [bug#34111] [PATCH] gnu: u-boot: Update to 2019.01.
Date: Mon, 4 Feb 2019 00:24:56 +0100

[Message part 1 (text/plain, inline)]

Hi Vagrant,

I've applied your patch to guix master as 4da4e952ddf9823d115997dbfa3bb45c74ac7463.

Thanks!

[Message part 2 (application/pgp-signature, inline)]

Previous Next

GNU bug tracking system
Copyright (C) 1999 Darren O. Benham, 1997,2003 nCipher Corporation Ltd, 1994-97 Ian Jackson.